Analytical Instruments
PH 100S : pH / ORP Transmitter
Electronet series PH-100S are PH / ORP Transmitters used for various industrial applications. It can accept input from pH / ORP electrode and pH / ORP signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line pH / ORP indication is provided through LCD. Span / Zero adjustments are easily accessibly.
DO 100S : DO Transmitter
Electronet series DO-100S are dissolved oxygen transmitters used for various industrial applications. It can accept input from DO electrode the signal is transmitted in the form of electrical 4 - 20 mA signal. The online indication is provided through LCD. Span/Zero adjustments are easily accessible.
CT 100S : Conductivity Transmitter
Electronet series CT-100S are Conductivity transmitters used for various industrial applications. It can accept input from conductivity electrode of cell constant 0.01 / 0.1 / 1 & conductivity signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line conductivity indication is provided through LCD.
CS 001 : Conductivity Sensor
Electronet series CS-001 are Conductivity Sensors designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants.
PH-TX-22 : pH / ORP Transmitter
Electronet series pH / ORP Transmitter PH-TX-22 is designed for use in general purpose water applications. The large volume single junction reference cell coupled with the non-fouling porous Teflon liquid junction assures a long life in general service.
DO-TX-22 : DO Transmitter
Electronet series DO Transmitter DO-TX-22 is designed for use in general purpose water applications. They are provided with accurate predetermined factory calibrated sensors. Rugged design and corrosive resistant material keep electrode spacing and surface area too long last.
CT-TX-22 : CT / TDS Transmitter
Electronet series CT / TDS Transmitter CT-TX-22 are designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants.
UAC 100 : Universal Analytical Controller
Electronet Series UAC - 100 is dual input analyzer with single or dual sensor input. This analyzer supports wide range of measurement choices in industrial applications. It can accept pH / Conductivity / ORP / DO sensor input in any combination.